Pakistan is facing severe energy shortage and therefore energy should be utilized very smartly in homes. As the electricity produced in our homes comes from limited resources that we have to pay for, and will ultimately run out of if we don’t utilize it responsibly. Becoming more energy efficient isn’t just for those of us who want to save the environment. Being energy efficient can really help your wallet. Whether it’s something as big as installing solar panels or something as small as turning off the lights, when you cut back on how much energy you use, you save money. There are many steps you can take to make your home more energy efficient. Some energy-efficient changes are one-time investments. Others are things you can do every day! Realize, though, that you don’t have to follow every step to be energy efficient. Even if you only implement two or three of these changes you will be saving energy, money, and the environment too.

Insulate your home

This measure requires extensive planning and is best done when constructing your home. Installing double-glazed windows and wall insulation in your home will help it maintain a comfortable temperature for a longer time and cut down on cooling and heating costs significantly. This might be cost-intensive at first, but will pay for itself in the long term. It’s important to make sure your house isn’t releasing too much air-conditioned air during the summer or heated air during the winter. If you have cracks in the frames of your windows, under your doors, in your houses basement or foundation, in the attic, or anywhere else in your home, you may be leaking electricity and money. Have a contractor inspect your home to determine whether additional insulation may be needed.

House orientation

The site orientation needs to be decided by an expert architect in order to utilize maximum benefit of sunlight. The decision is taken depending on location and environmental conditionals of the area. Similarly, room orientations save energy too. Rooms facing east receive sunlight during morning and are cooler in the afternoon; ideal for kitchens and bedrooms. West-facing rooms should be avoided for these purposes.

Rooms facing south receive sunlight during most of the day; making these ideal for living and dining rooms. Garages, bathrooms, and laundries do best with north-facing rooms as these receive low sunlight.

Ventilation systems

A well-designed ventilation system does not only add to comfort of the residents but prevents overuse of electrical appliances for heating and cooling. Home designs are planned to ensure healthy natural ventilation, but it is not as effective nowadays. The reason is the use of heating and cooling systems requiring to keep homes closed off and changing environmental conditions. This is why spot and whole-house ventilation systems are implemented to make homes better at conserving energy.

Keep the water heater on pilot or at a lower setting

Whether your water heater/geezer runs on gas or electricity, it can consume quite a lot of energy due to its constant running and need to maintain the set temperature. You can reduce this energy by keeping it running on the pilot setting or keeping the thermostat at warm rather than hot, depending on the settings your water heater has. You can also make it more efficient by adding an insulator layer, which will maintain the set temperature for longer without consuming excess energy. Older tank-style water heaters use a lot of energy keeping the water in the tank hot. In fact, your water heater may account for up to a quarter of your energy use. To reduce the amount of energy your water heater uses, set the temperature of the water to 120 F (49 C). Don’t set your water heater any lower than 120 F (49 C), as this can allow dangerous pathogens to thrive in your water tank. You’ll save energy by turning down the water heater regardless of whether you have a gas or electric appliance, because it requires a lot of energy to produce the gas you use in your house. You can also make your water heater more efficient by covering it with an insulating blanket, and by adding insulating sleeves to the pipes.

Update your appliances

Older appliances were not manufactured with energy consumption concerns in mind and use outdated technology which pulls a lot of electricity. We all have those chunky appliances lying around handed down by our parents, but it might be time to update them. Most companies today make energy saving a top priority when manufacturing appliances, and compressors, in particular, have become much more efficient without taking up too much energy. Earlier domestic devices tend to use a lot more energy than modern ones, and energy-efficient appliances will use the least energy possible. When it comes time to replace old appliances, look for the Energy Star rating or another energy-efficiency seal of approval. Energy Star appliances use up to 50 percent less energy and water than their traditional counterparts.

  • Front-loading washing machines are more energy-efficient than top-loading ones
  • Refrigerators with the freezer on top or the bottom are more energy-efficient than side-by-side refrigerator-freezers
  • Stoves with ceramic induction cook tops are more energy-efficient than traditional range cook tops
  • Thankless on-demand water heaters are much more energy-efficient than tank-style water heaters

Use extension wires for appliances

It has been estimated by experts that appliances that are plugged in use up to 75% of their energy consumption when they are not in use. This is a worrying figure for both your bills and the environment, so measures need to be taken accordingly. What you can do is plug your appliances into smart power strips, which can cut off their energy absorption with the click of a button. This will help save a significant amount of energy and you will also see the difference in your bills.

Switch off and unplug chargers when not in use

One thing most of us are guilty of is leaving chargers on for prolonged periods of time. When you’re done charging your devices, switch your chargers off and unplug them. Even if they’re off and plugged in without the device attached, they continue to consume electricity.

Turn lights off or get automated lighting systems

Pages: 1 2

Leave a Reply

Your email address will not be published. Required fields are marked *
You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>